Page 11
Installation and Technical Application Guide
HNB
TM
Modular Digital Mixer Amplifiers for Audio and Video
Sansonic Electronics USA LLC 9950 E. Baldwin Place, El Monte CA 91731 (T) 626-454-8203 (F) 626-433-1079 (W) www.sansonic.net
3.3 Plug-in Modules: Video Module HB-V and HB-VR Video Receiver
Video Module (HB-V)
The HNB video module HB-V is an integrated high performance video input
used to transmit VGA (RGB), Composite video and S-video signals to its com-
panion HB-VR receiver unit. HB-V provides a fully integrated and buffered
‘loop through’ monitor output to support desktop applications. Common con-
nectors are utilized: DB-15HD, RCA and DIN. Video signal transmission is
achieved via a single RJ45-CAT5e UTP cable to the HB-VR receiver up to
150 feet / 45 meters between the HB-V and the HB-VR units. Power and
‘Signal Present’ green LEDs are utilized at both ‘Transmit’ and ‘Receive’ ends.
Module Features:
• Supports multiple video source inputs: VGA, Composite video, S-video.
• Override priority to ‘Video’ inputs allows simultaneous use with VGA source.
• Fits into standard 2-gang electrical box (3.5”DEEP) with Decora wall plate.
• AM/FM ‘RF’ and audible noise suppression.
• Signal to noise at 85dB and sensitivity at -16dBu.
• Video transmission via CAT5e UTP up to 150’ / 45M wired per EIA/TIA 568B.
• Operational bandwidth up to 350MHz.
• Video differential gain / phase at 2%.
• Attenuation loss at 1dB at 300’ at 1MHz.
• Maximum capacitance at 20pf/foot UTP and 75-100 ohm impedance matching.
• Visible active ‘Power’ status and ‘Video Signal’ LEDs (Green).
• Power 5V nominal via HNB-A at 24VDC/2.5A from common power supply.
HB-V HB-V
Front view Side view
HB-VR
Front view
HB-VR
Side view
Video Receiver (HB-VR)
The HNB video receiver HB-VR is an integrated high performance video
receiver used to receive VGA (RGB), composite video and s-video signals
from its companion HB-V transmit module. HB-VR provides high performance
impedance matching of video to the projector in VGA, composite and s-video
formats. Common connectors are utilized: DB-15 HD, RCA, and DIN. Video
signal transmission is achieved via a single RJ45-CAT5e UTP cable from the
HB-V module up to 150 feet / 45 meters between the HB-V and HB-VR units.
Visible ‘Power’ and ‘Signal Present’ Green LEDs are utilized to support easy
installation and trouble shooting.
Receiver Features:
• Supports multiple video source inputs: VGA, composite video, S-video.
• Provides convenient discrete VGA, S-video and composite cables for
direct connection to AV projectors.
• Override priority to ‘Video’ inputs allows simultaneous use with VGA source.
• Compact plastic housing for easy mounting at the projector.
• AM/FM ‘RF’ and audible noise suppression.
• Signal to noise at 85dB and sensitivity at -16dBu.
• Transmission via single CAT5e UTP cable up to 150’ / 45M wired per EIA/TIA
568B.
• Operational bandwidth up to 350MHz.
• Video differential gain / phase at 2%.
• Attenuation loss at 1dB at 300’ at 1MHz.
• Maximum capacitance at 20pf/foot UTP and 75-100 ohm impedance matching.
• Visible active ‘Power’ status and ‘Video Signal’ LEDs (Green).
• Power 5V nominal via HNB-A at 24VDC/2.5A from common power supply.
Use in HNB-B RIGHT SLOT
Use at AV Projector
(8 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales